Component:

Alkyd resin, modified resin, aluminum paste, iron oxide red, filler, drier and solvent, etc.

Application:

Interior and exterior superstructure of shipping, barrier cabin, antirust paint for pipeline and steel structures

Properties:

Non-lead, non-toxic, drying faster than common antirust paint, good general duty

Physical Parameter:

Color: Light aluminum red

Specific Gravity: Approx. 1.25 kg/L

Theoretic Dosage: 0.09 kg/m2

Film Thickness: WFT: 75μm DFT: 40μm

Flash Point: 35℃

Drying Time: 25℃, Dust-Free: ≤3 h, Hard Drying: ≤24 h

Storage: 1 year

Application Parameter:

Formula Ratio: One pot

Curing Time: Use directly after being opened

Pot Life: Infinite

Coating Method: High-pressure airless spray, hand brushing, roll coating

Diluent/ Dilution Ratio: Diluent for 104 alkyd coatings, <5%

Coating Interval: 10~25℃, Min. 48~24 h; Over 25℃, Min.20 h, Max. 3 months

Surface Treatment: Secondary rust removing must be made on surface of shop primer till qualified to Sa2 Standard of Sweden.

Recommended Layers: 2 layers of high-pressure airless spray, 70μm DFT

Pre-Coat Accessory Coatings: H06 epoxy zinc rich shop primer, H06 epoxy zinc rich primer, H53-5 epoxy iron red shop primer, E06 inorganic zinc rich shop primer, E06-28 inorganic zinc silicate shop primer

Post-Coat Accessory Coatings: C04-2 alkyd enamel (universal), C04-42 alkyd enamel (weather resistant)

Claim:

The data in this Specification is derived from experiments and practical applications, and can be regarded as a guide for application. The production in question is only for specialty application. Otherwise we only guarantee the quality of the said coating itself if it is used in other sectors undescribed herein or fresh sectors.