Component:

Two-component (A and B) coatings made from epoxy resin, MIO, plasticity agent for antirust pigment, and curing agent.

Application:

Anti-corrosion primer, semi-paint for anticorrosion coating, increasing the properties of sealing and anticorrosion used with epoxy zinc rich primer.

Properties:

Excellent properties of sealing and adhesion on zinc rich primer and zinc coating, hard film, resistance to wear, keeping impact resistance and elasticity for a long-term, good durability, good ply adhesion with post-coat paint.

Physical Parameter:

Color: Grey or brown

Density: 1.37 kg/L 

Film Thickness: WFT: 95μm DFT: 50μm

Theoretic Dosage: 0.14 kg/m2

Flash Point: Component A (Binder) 27℃; Component B (Curing Agent) 27℃

Drying Time: 23℃, Dust-Free: ≤2 h, Hard Drying: ≤24 h, Fully Curing: 7d

Storage: 1 year

Application Parameter:

Formula Ratio: Component A : Component B = 10 : 1 (Weight Ratio)

Curing Time: 23℃, 30 min

Pot Life: 23℃, 8 h, unsuitable for application below 5℃

Coating Method: Spraying, hand brushing, roll coating

Diluent/ Dilution Ratio: Diluent for 102 epoxy resin coatings, <5%

Surface Treatment: Sand blasting must be made on surface of steel till qualified to Sa 2.5 or hand rust removing till qualified to St 3.

Pre-Coat Accessory Coatings: Zinc rich primer and epoxy iron red antirust paint, etc.

Post-Coat Accessory Coatings: Top coat of epoxy, epoxy asphalt, chlorinated rubber, polyurethane and acrylic acid, etc.

Coating Interval: 23℃, Min. 6 h, Max. 30d

Claim:

The data in this Specification is derived from experiments and practical applications, and can be regarded as a guide for application. The title product is only for specialty application. Otherwise we only guarantee the quality of the said coating itself if it is used in other sectors undescribed herein or fresh sectors.