Component:
Chlorinated rubber, plasticizer, glass scale and other filler, additive, solvent, etc.

Application:
Corrosion protection of steel and concrete, as well as added layer for chlorinated rubber anticorrosion paint.

Properties:
Excellent resistance to water, chemicals, weather, humidity-dry cycling, fast drying, good adhesion, work well with other coatings.

Physical Parameter:
Color: Light gray, green, iron red

Specific Gravity: Approx. 1.30 kg/L

Theoretic Dosage: 0.3 kg/m2

Drying Time: 25℃,  Dust-Free: ≤4 h,  Hard Drying: ≤16 h

Film Thickness: WFT: 230μm    DFT:  80μm

Storage:  1 year

Flash Point: 31℃

Application Parameter:
Formula Ratio: One pot

Curing Time: Instant usage

Pot Life: No limits

Coating Method: High-pressure airless spray, hand brushing, roll coating

Diluent/Dilution Ratio: 101 chlorinated rubber coatings diluent, <5%

Coating Interval: 0℃:Min.24h; Max. Infinite; 20℃: Min. 8h; Max. Infinite; 30℃:Min. 6h, Max. Infinite

Surface Treatment: Secondary derusting must be made on the shop primer coated surface till qualified to St3 Standard of Sweden. If the chlorinated rubber aluminum anticorrosion paint coated surface has been exposed in polluting environment for a long time, it should be washed by high pressure freshwater and dried before coating.

Pre-Coat Accessory Coatings: Zinc rich paint, H53-81 epoxy iron red anticorrosion paint, J52-84 chlorinated rubber aluminum flake mastic anticorrosion paint, etc.

Post-Coat Accessory Coatings: J52-10 chlorinated rubber glass scale topcoat, J52-12 chlorinated rubber mastic topcoat, etc.

Claim:
The data in this Specification is derived from experiments and practical applications, and can be regarded as a guide for application. The title product is only for specialty application. Otherwise we only guarantee the quality of the said coatings itself if it is used in other sectors undescribed herein or fresh sectors.