Component:

Two-component anticorrosion coatings made from epoxy resin, anticorrosion pigment filler, additives and curing agent, etc.

Application:

Excellent resistance to oil, water and chemicals, good adhesion and abrasion performance, high solid content, no effect on quality after using.

Properties:

Anticorrosion coatings for establishments on main pot of oil cabin, gasoline, kerosene and diesel oil, and other petroleum & chemicals.

Physical Parameter:

Color: Iron red

Density: 1.4 kg/L

Film Thickness: Primer: WFT: 180μm    DFT:  100μm

Theoretic Dosage:0. 25 kg/m2

Flash Point: Approx. 22℃ 

Drying Time: 23℃, Dust-Free: ≤4 h, Hard Drying: ≤48 h, Fully Curing: 7 d

Storage: 1 year

Application Parameter:

Formula Ratio: Component A : Component B = 10 : 1.5 (Weight Ratio)

Curing Time: 23℃, 30 min

Pot Life: 23℃, 8 h

Coating Method: Spray, hand brushing, roll coating

Diluent/ Dilution Ratio: Diluent for 102 epoxy resin coatings,     <5%

Surface Treatment: Sand blasting qualified to Sa 2.5 or hand rust removing till qualified to St.3

Recommended Layers: H84 coatings for oil or water cabin: 2~4 layers 

Coating Interval: 23℃, Min. 24 h,  Max. 7 d

Application Temperature: Over 5℃, otherwise stopping curing and unable to apply.

Claim:

The data in this Specification is derived from experiments and practical applications, and can be regarded as a guide for application. The title product is only for specialty application. Otherwise we only guarantee the quality of the said coating itself if it is used in other sectors undescribed herein or fresh sectors.