J86-7 Chlorosulfonated polyethylene concrete title coating


Chlorosulfonated polyethylene, modified resin, pigment, filler, additive, curing agent and solvent.


Concrete stack, power transmission equipment.


Excellent resisting weather, good anti corrosive, resisting water/hot/cold. Film dry fast, you can paint it in the low temperature. The color of film is excellent.

Physical Parameter:

Color: all color

Density: 0.96 kg/L

Film Thickness: WFT: 160µm  DFT: 125µm

Theoretic Dosage: 0.20 kg/㎡

Flash Point: A20℃,B10℃ 

Drying Time: 25℃, Dust-Free: ≤0.5 h, Hard Drying: ≤24 h, Fully Curing: 7d 

Storage: A 8 months, B 6 months

Application Parameter:

Formula Ratio: Component A : Component B = 10 : 1 

Pot Life: painting after mixing.

Coating Method: Spraying, hand brushing, roll coating

Diluent/Dilution Ratio: 102 chorosulfonated polyethylene special diluent , <5%

Surface Treatment:1 concrete surface must be dry, no loose , oil and dirt.

2 new concrete surface could not be painted until the surface is up to maintaining strength.

3 concrete surface must be dry.

Suggest layers of Coatings: layer: 4, DFT 100µm 

Coating Interval: 25℃, Min. 0.5 h; Max 7d.


The data in this Specification is derived from experiments and regarded as a guide for application. The title product is "only for only guarantee the quality of the said coating itself if it is used in fresh sectors. practical applications, and can be specialty application. Otherwise we other sectors undescribed herein or fresh sectors.

Immediately Consult
Message *
Name *
Verification code *
Other Products
New Products
No content